Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Transport properties of 2:2 symmetrical electrolytes in (water + ethylene glycol) binary mixtures at T = 293.15 K

Tsierkezos, N. G.[Nikos G.], Molinou, I. E.[Ioanna E.]
J. Chem. Thermodyn. 2006, 38, 11, 1422-1431
ABSTRACT
The specific conductivities (k), the densities (rho), and the absolute viscosities (eta) of solutions of zinc(II) sulfate in (water + ethylene glycol) (EG) binary mixtures have been measured at T = 293.15 K. The conductivity data have been analyzed using the Lee Wheaton conductivity equation and the limiting molar conductivities (Lambda_o), the association constants (K_A), and the centre-to-centre distance of the formed ion pairs (alpha) have been derived. The limiting ion conductivities (lambda^deg_+-) have been evaluated and used for the calculation of the "corrected" Stoke's radii (r_Cor), according to the method proposed by Robinson and Stokes. The ion mobilities have been found to be controlled completely by the bulk viscosity. The ionic association was enhanced with the increasing of the EG content in the solvent mixtures, due to the gradual decrease of the dielectric constant of the solvent medium. The formed ion pairs have been recognized to be solvent separated pairs. The viscosity data have been interpreted in terms of the Jones-Dole equation. The B_i viscosity coefficient indicated that the Zn^2+ ion acts as a "structure maker."
Compounds
# Formula Name
1 C2H6O2 1,2-ethanediol
2 O4SZn zinc sulfate
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 1
  • 3
  • 2
  • Mass density, kg/m3 ; Liquid
  • Amount concentration (molarity), mol/dm3 - 2; Liquid
  • Solvent: Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 179
  • POMD
  • 1
  • 3
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Amount concentration (molarity), mol/dm3 - 2; Liquid
  • Solvent: Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • digital bridge-type conductivity meter
  • 80
  • POMD
  • 1
  • 3
  • 2
  • Viscosity, Pa*s ; Liquid
  • Amount concentration (molarity), mol/dm3 - 2; Liquid
  • Solvent: Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 99
  • POMD
  • 3
  • 2
  • Mass density, kg/m3 ; Liquid
  • Amount concentration (molarity), mol/dm3 - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 18
  • POMD
  • 3
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Amount concentration (molarity), mol/dm3 - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • digital bridge-type conductivity meter
  • 8
  • POMD
  • 3
  • 2
  • Viscosity, Pa*s ; Liquid
  • Amount concentration (molarity), mol/dm3 - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 10
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 10
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Mass fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 10