Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

The (p,q,T) of (methanol + benzene) and (methanol + ethylbenzene)

Naziev, Y. M.[Ya. M.], Shahverdiyev, A. N.[Astan N.], Hasanov, V. H.[Vaqif H.]
J. Chem. Thermodyn. 2005, 37, 12, 1268-1275
ABSTRACT
The (p,q,T) of methanol, ethylbenzene and (methanol + benzene) and (methanol + ethylbenzene) at temperatures between (290 and 500) K and pressures in the range (0.1 to 60) MPa have been measured with a magnetic suspension densimeter with an uncertainty of +-0.1%. Our measurements with methanol deviate from the literature values by less than 0.2%. The (p,q,T) measurements were fitted with experimental uncertainties by an empirical equation. The temperature and mole fraction dependence of the coeffi-cients of the equation of state are presented.
Compounds
# Formula Name
1 C6H6 benzene
2 CH4O methanol
3 C8H10 ethylbenzene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Buoyancy - hydrostatic balance
  • 64
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Buoyancy - hydrostatic balance
  • 66
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Buoyancy - hydrostatic balance
  • 215
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Buoyancy - hydrostatic balance
  • 193