Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Experimental measurement of carbon dioxide solubility in 1-methylpyrrolidin-2-one (NMP) + 1-butyl-3-methyl-1H-imidazol-3-ium tetrafluoroborate ([bmim][BF4]) mixtures using a new static-synthetic cell

Ebrahiminejadhasanabadi, Mojgan, Nelson, Wayne Michael, Naidoo, Paramespri, Mohammadi, Amir H., Ramjugernath, Deresh
Fluid Phase Equilib. 2018, 477, 62-77
ABSTRACT
A new experimental setup based on the "static-synthetic" method was designed and commissioned for the measurement of solubility from vacuum to moderates pressures. The new apparatus and experimental method were extensively validated by measuring the solubility of carbon dioxide in three pure solvents, viz., n-hexane, n-methyl-2-pyrrolidone and 1-butyl-3-methylimidazolium tetrafluoroborate. New solubility data for carbon dioxide in hybrid solvents with different mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate + n-methyl-2-pyrrolidone were measured at three temperatures, viz. (298.15, 313.15 and 323.15) K. Additionally, viscosity, density and sound velocity for binary mixtures of n-methyl-2-pyrrolidone + 1-butyl-3-methylimidazolium tetrafluoroborate were measured. The experimental phase equilibrium data were modelled using the Peng-Robinson equation of state and van der Waals mixing rule. In general, the solubility of carbon dioxide in the hybrid solvent was lower than the respective pure constituents. However, the hybrid solvent exhibited a significantly lower viscosity than the pure ionic liquid.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 C6H14 hexane
3 C5H9NO N-methylpyrrolidone
4 C8H15BF4N2 1-butyl-3-methylimidazolium tetrafluoroborate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • UNKNOWN
  • 11
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 3
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Single path-length method
  • 11
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • UNKNOWN
  • 11
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 4
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Single path-length method
  • 11
  • POMD
  • 2
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 19
  • POMD
  • 1
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 53
  • POMD
  • 1
  • 4
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 56
  • POMD
  • 1
  • 3
  • 4
  • Boiling temperature at pressure P, K ; Liquid
  • Solvent: Mass fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 63
  • POMD
  • 3
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • UNKNOWN
  • 66
  • POMD
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 66
  • POMD
  • 3
  • 4
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Single path-length method
  • 66