Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Viscosity and self-diffusivity of ionic liquids with compressed hydrofluorocarbons: 1-hexyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide and 1,1,1,2- tetrafluoroethane.

Ahosseini, A.[Azita], Ren, W.[Wei], Weatherley, L. R.[Laurence R.], Scurto, A. M.[Aaron M.]
Fluid Phase Equilib. 2017, 437, 34-42
ABSTRACT
The viscosity and self-diffusivity of mixtures of the ionic liquid, 1-hexyl-3- methylimidazolium bis(trifluoromethylsulfonyl)amide ([HMIm][Tf2N]), and the compressed gas, 1,1,1,2-tetrafluoroethane (R-134a), were measured at three different temperatures (298.15 K, 323.15 K, 343.15 K) and pressures to 21 bar. The high-pressure vapor-liquid equilibrium (VLE) of the ionic liquids with R-134a was measured to calculate the composition of the liquid phase at the various pressures encountered in the viscosity and diffusivity measurements. The viscosity of the ionic liquid decreases significantly with increased composition of R-134a at VLE. The excess viscosity demonstrates positive values that are believed to represent relatively strong intermolecular forces of the polar R-134a and [HMIm][Tf2N]. The self-diffusivity of mixtures of [HMIm][Tf2N] and liquefied R-134a (298.15 K and 6.7 bar) was measured and increases significantly with increases in the composition of R-134a. The selfdiffusivity of [HMIm][Tf2N] in vapor-liquid equilibrium with compressed R-134a gas was measured and indicates similar increases in diffusivity with composition of R-134a. The diffusivity demonstrates close Stokes-Einstein behavior using the measured mixture viscosity data and ambient pressure self-diffusivity.
Compounds
# Formula Name
1 C2H2F4 1,1,1,2-tetrafluoroethane
2 C12H19F6N3O4S2 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Self diffusion coefficient, m2/s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • NMR
  • 1
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Oscillating piston [Cambridge Applied Systems Model]
  • 1
  • POMD
  • 2
  • Self diffusion coefficient, m2/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • NMR
  • 3
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Oscillating piston [Cambridge Applied Systems Model]
  • 7
  • POMD
  • 1
  • 2
  • Tracer diffusion coefficient, m2/s - 1 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • NMR
  • 6
  • POMD
  • 1
  • 2
  • Tracer diffusion coefficient, m2/s - 2 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • NMR
  • 11
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Closed cell (Static) method
  • 11
  • POMD
  • 1
  • 2
  • Molar volume, m3/mol ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • High-pressure cell with syringe pump
  • 11
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Gas
  • Liquid mixture 1
  • Liquid mixture 2
  • Closed cell (Static) method
  • 1
  • POMD
  • 1
  • 2
  • Triple point temperature, K ; Gas
  • Mole fraction - 1; Liquid mixture 1
  • Gas
  • Liquid mixture 1
  • Liquid mixture 2
  • VISOBS
  • 1
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • ?
  • 1
  • POMD
  • 1
  • 2
  • Upper consolute pressure, kPa ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Closed cell (Static) method
  • 1
  • POMD
  • 1
  • 2
  • Tracer diffusion coefficient, m2/s - 2 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • NMR
  • 5