Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Physicochemical properties of piperidinium, ammonium, pyrrolidinium and morpholinium ionic liquids paired with bis(trifluoromethylsulfonyl)imide anion

Ibrahim, M. H.[Muna Hassan], Hayyan, M.[Maan], Hashim, M. A.[Mohd Ali], Hayyan, A.[Adeeb], Hadj-Kali, M. K.[Mohamed K.]
Fluid Phase Equilib. 2016, 427, 18-26
ABSTRACT
This study aims to investigate the temperature dependence of the physicochemical properties of five cations paired with bis(trifluoromethylsulfonyl)imide anion, namely 1-(2-methoxyethyl)-1- methylpiperidinium bis(trifluoromethylsulfonyl)imide, 1-(2-methoxyethyl)-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, N-methoxyethyl-N-methylmorpholinium bis(trifluoromethylsulfonyl) imide, N-ethyl-N,N-dimethyl-2-methoxyethylammonium bis(trifluoromethylsulfonyl)imide and ethyldimethyl- propylammonium bis(trifluoromethylsulfonyl)imide. The density, viscosity, conductivity and surface tension of the resulting ionic liquids (ILs) have been determined within the temperature range (298.15e353.15) K. It has been found that all ILs exhibited Arrhenius behavior for conductivity and viscosity while the surface tension and density followed a linear trend. A satisfactory agreement was obtained between our experimental densities and those predicted by the group contribution model. This study is essential in the application of these ILs for process design and will reinforce the development of new correlations and other predictive methods in particular when the physicochemical properties are scarce, like in the case of morpholinium-based ILs.
Compounds
# Formula Name
1 C11H20F6N2O5S2 1-(2-methoxyethyl)-1-methylpiperidinium bis(trifluoromethylsulfonyl)imide
2 C10H18F6N2O6S2 4-(2-methoxyethyl)-4-methylmorpholinium bis(trifluoromethylsulfonyl)amide
3 C10H18F6N2O5S2 1-(2-methoxyethyl)-1-methylpyrrolidinium bis((trifluoromethyl)sulfonyl)amide
4 C9H18F6N2O5S2 N-ethyl-N,N-dimethyl-2-methoxyethylammonium bis(trifluoromethylsulfonyl)imide
5 C9H18F6N2O4S2 N-ethyl-N,N-dimethyl-1-propanaminium 1,1,1-trifluoro-N-[(trifluoromethyl)sulfonyl]methanesulfonamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 7
  • POMD
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Direct current cell with electrodes
  • 7
  • POMD
  • 1
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Ring tensiometer
  • 7
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 7
  • POMD
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Direct current cell with electrodes
  • 7
  • POMD
  • 2
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Ring tensiometer
  • 7
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 7
  • POMD
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Direct current cell with electrodes
  • 7
  • POMD
  • 3
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Ring tensiometer
  • 7
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 7
  • POMD
  • 4
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Direct current cell with electrodes
  • 7
  • POMD
  • 4
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Ring tensiometer
  • 7
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 5
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 7
  • POMD
  • 5
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Direct current cell with electrodes
  • 7
  • POMD
  • 5
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Ring tensiometer
  • 7