Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

The influence of temperature on liquid-liquid-solid equilibria for (water + 2-propanol + KCl +NH4Cl) quaternary system

Zhong, Y.[Yunlong], Chen, J.[Jianxin], Han, J.[Jian], Su, M.[Min], Li, Y.[Yinhui], Lu, A.[Aidang]
Fluid Phase Equilib. 2016, 425, 158-168
ABSTRACT
The influence of temperature on liquideliquidesolid (L-L-S) equilibria for (water + 2- propanol + KCl + NH4Cl) quaternary system with different KCl/NH4Cl mass ratios (1/0, 1/3, 1/1, 3/1, 0/1) were systematically investigated. Phase-transition temperature under different salt ratios was determined, seven diagrams of liquideliquidesolid equilibria around these temperatures were measured and the transitions between two different shapes (L-L-S and L-S equilibria) were studied. Mutual solubility, binodal curve and tie-line data for quaternary system in different temperature were obtained, and it was found that the effect of temperature on phase equilibrium was significant, but insignificant on the variation of binodal curve under the same salt ratio. Moreover, binodal curve data with KCl/NH4Cl mass ratios (1/0, 1/3, 1/1, 3/1, 0/1) at different temperatures were fitted by three-parameter equation. The relation between phase-transition temperature and different salt mass fraction was established by a polynomial equation with five parameters, and result shows that the lowest splitting temperature is around 18.6 C corresponding with 71.1% (wt%) NH4Cl. In addition, both temperature and 2-propanol amount affect the salt precipitation, which varies with 2-propanol concentration at different temperature in quadratic polynomial mode.
Compounds
# Formula Name
1 ClK potassium chloride
2 H2O water
3 ClH4N ammonium chloride (NH4Cl)
4 C3H8O propan-2-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 5
  • POMD
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Titration method
  • 5
  • POMD
  • 4
  • 1
  • 2
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Solvent: Mass fraction - 4; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 5
  • POMD
  • 4
  • 1
  • 2
  • Mass fraction - 1 ; Liquid
  • Mass fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 7
  • POMD
  • 4
  • 1
  • 2
  • Mass fraction - 2 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mass fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • concentration of potassium was calculated by subtracting the concentration of ammonium ion from the total anion
  • 165
  • POMD
  • 4
  • 1
  • 2
  • Mass fraction - 1 ; Liquid mixture 1
  • Mass fraction - 1 ; Liquid mixture 2
  • Mass fraction - 4 ; Liquid mixture 2
  • Mass fraction - 4; Liquid mixture 1
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • Titration method
  • Titration method
  • 1
  • POMD
  • 4
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Solvent: Mass fraction - 4; Liquid
  • Liquid
  • Crystal - 3
  • Titration method
  • 5
  • POMD
  • 4
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Titration method
  • 26
  • POMD
  • 4
  • 2
  • 3
  • Mass fraction - 3 ; Liquid mixture 2
  • Mass fraction - 3 ; Liquid mixture 1
  • Mass fraction - 4 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mass fraction - 4; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Titration method
  • Titration method
  • Titration method
  • 5
  • POMD
  • 4
  • 2
  • 3
  • Mass fraction - 3 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mass fraction - 4; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • determined by means of oxidation with potassium
  • 56
  • POMD
  • 4
  • 1
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 5
  • POMD
  • 4
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Titration method
  • 5