Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Phase equilibria, volumetric and compressibility properties of (tetra-n-butylammonium bromide + trisodium citrate) system at temperatures (298.15 K - 318.15 K) and atmospheric pressure

Hooshyar, H.[Hossein], Sadeghi, R.[Rahmat], Khanahmadzadeh, S.[Salah]
Fluid Phase Equilib. 2016, 417, 158-165
ABSTRACT
Liquid-liquid equilibrium data and phase diagram corresponding to new (salt + salt) aqueous biphasic system composed of tetra-n-butylammonium bromide and trisodium citrate were determined by varying temperature and atmospheric pressure. The effects of temperature and salt induced on the binodals and tie-lines of the investigated ATPS were also studied. It was found that an increase in temperature caused the expansion of the two-phase region and increased the slope and the length of the tie line. In order to obtain further evidence about the salting-out effect produced by the addition of trisodium citrate, Na3Cit to an aqueous solution of water-miscible tetra-n-butylammonium bromide, volumetric and compressibility behavior have been measured at temperatures (298.15 K 318.15 K). The densities and speeds of sound data have been utilized to calculate apparent molar volumes, the apparent molar isentropic compressibility, the values of these apparent molar quantities at infinite dilution and partial molar characteristics include the volume and compressibility of transfer at infinite dilution from pure water to the aqueous salt solution.
Compounds
# Formula Name
1 C6H5Na3O7 trisodium citrate
2 C16H36BrN tetrabutylammonium bromide
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 96
  • POMD
  • 1
  • 2
  • 3
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Solvent: Amount ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Sing-around technique in a fixed-path interferometer
  • 96
  • POMD
  • 1
  • 2
  • 3
  • Molality, mol/kg - 2 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Molality, mol/kg - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration
  • 56
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 2 ; Liquid mixture 2
  • Mass fraction - 1 ; Liquid mixture 1
  • Mass fraction - 2 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mass fraction - 1; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Flame Photometry
  • Flame Photometry
  • Flame Photometry
  • 15
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 126
  • POMD
  • 2
  • 3
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Sing-around technique in a fixed-path interferometer
  • 126