Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Solid-liquid metastable phase equilibria for the ternary system (Li2SO4 + K2SO4 + H2O) at 288.15 and 323.15 K and p = 0.1 MPa

Bu, B. H., Li, L., Zhang, N., Guo, Y. F., Wang, S. Q., Sun, L. Y., Deng, T. L.
Fluid Phase Equilib. 2015, 402, 78-82
ABSTRACT
Metastable solubilities and physicochemical properties including density and refractive index of the aqueous ternary system (Li2SO4 + K2SO4 + H2O) at 288.15 and 323.15 K and p = 0.1 MPa were determined with the isothermal evaporation method. On the basis of experimental data, the metastable phase diagrams and the diagram of physicochemical properties versus composition in the system at 288.15 and 323.15 K were plotted. In the metastable phase diagrams of this ternary system at 288.15 and 323.15 K, there are all in two invariant points, three univariant solubility curves, and three metastable crystallization regions, corresponding to lithium sulfate monohydrate Ls, Li2SO4*H2O), double salt (Db, K2SO4*Li2SO4) and arcanite (Ar, K2SO4). The hydrates in this system at both temperatures belong to a hydrate type I, and the double salt (K2SO4*Li2SO4) belongs to incongruent at 288.15 K and congruent double salt at 308.15 K, respectively. A comparison of the metastable phase diagrams at 288.15 and 323.15 K shows that the area of Ar is decreased obviously whereas the areas of Db and Ls are increased with the increasing of temperature, and no solid solutions were found. The density and refractive index in the metastable ternary system at 288.15 and 323.15 K change regularly with the mass fraction of potassium sulfate concentration and reach the extremum values at the invariant points. The densities and refractive indices were correlated with empirical equations, and the calculated values at two temperatures agree well with the experimental results.
Compounds
# Formula Name
1 H2O water
2 K2O4S potassium sulfate
3 Li2O4S lithium sulfate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 15
  • POMD
  • 1
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 22
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 15
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 20
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • gravimetric methods using sodium tetraphenyl borate and barium chloride as the precipitators
  • 2
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal of intercomponent compound 2
  • gravimetric methods using sodium tetraphenyl borate and barium chloride as the precipitators
  • 7
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal of intercomponent compound 2
  • gravimetric methods using sodium tetraphenyl borate and barium chloride as the precipitators
  • 16
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal - 2
  • gravimetric methods using sodium tetraphenyl borate and barium chloride as the precipitators
  • 4
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • gravimetric methods using sodium tetraphenyl borate and barium chloride as the precipitators
  • 2
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 3 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal - 2
  • gravimetric methods using sodium tetraphenyl borate and barium chloride as the precipitators
  • 4