Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Equilibrium solubility of carbon dioxide in aqueous potassium Lasparaginate and potassium L-glutaminate solutions

Chen, Z.-W.[Zhe-Wei], Leron, R. B.[Rhoda B.], Li, M.-H.[Meng-Hui]
Fluid Phase Equilib. 2015, 400, 20-26
ABSTRACT
Aqueous amino acid salt solutions are promising alternatives to aqueous alkanolamine absorbents for CO2 capture. In this study, the absorption of CO2 in two amino acid salt systems: aqueous potassium Lasparaginate (KAsn) and aqueous potassium L-glutaminate (KGln) were investigated. Using a vapor liquid equilibrium apparatus, the solubility of CO2 in aqueous KAsn and KGln solutions were determined at temperatures 313.2, 333.2, and 353.2 K and pressures up to 950 kPa. The amino acid salt concentration in the solutions was varied from 8.5 to 34.0 wt% for KAsn and 9.2 to 36.8 wt% for KGln. The studied amino acid salt systems were found to have appreciable CO2 absorption capacities, which were comparable with those of commonly used alkanolamines. A modified Kent Eisenberg model was applied to correlate CO2 solubility (expressed as mole CO2 per mole amine) in the solution with CO2 partial pressure, temperature, and amino acid salt concentration. The model satisfactorily predicted the equilibrium data. The obtained average absolute deviations between the experimental and the calculated values of equilibrium CO2 partial pressures were 12.8% and 10.3%, for aqueous KAsn and KGln systems, respectively.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 C3H6KNO2 potassium Salt of sarcosine
3 C4H7KN2O3 potassium L-asparaginate
4 C5H9KN2O3 potassium L-glutaminate
5 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 5
  • 2
  • Amount ratio of solute to solvent - 1 ; Liquid
  • Pressure, kPa - 1; Gas
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Liquid
  • Gas
  • Potentiometric titration w/ BaCl2
  • 12
  • POMD
  • 1
  • 5
  • 3
  • Mass ratio of solute to solvent - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Pressure, kPa - 1; Gas
  • Liquid
  • Gas
  • potentiometric titration with BaCl2
  • 93
  • POMD
  • 1
  • 5
  • 4
  • Mass ratio of solute to solvent - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 4; Liquid
  • Pressure, kPa - 1; Gas
  • Liquid
  • Gas
  • potentiometric titration with BaCl2
  • 100