Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Saturated vapor pressure of 4-fluorophthalic anhydride and 4-chlorophthalic anhydride and isobaric vapor-liquid phase equilibrium of 4-fluorophthalic anhydride + 4-chlorophthalic anhydride: Measurement and modeling

Li, R.[RongRong], Du, C.[CunBin], Han, S.[Shuo], Wang, J.[Jian], Yao, G.[GanBing], Zhao, H.[HongKun]
Fluid Phase Equilib. 2015, 396, 35-42
ABSTRACT
The saturated vapor pressures of 4-fluorophthalic anhydride and 4-chlorophthalic anhydride at various temperatures ranging from T = (426 to 560) K, and the isobaric vapor-liquid phase equilibrium data for binary system of 4-fluorophthalic anhydride (1) + 4-chlorophthalic anhydride (2) at pressures of 21.33 kPa, 41.33 kPa, 61.33 kPa and 81.33 kPa were measured experimentally by means of an inclined ebulliometer. The relationship between saturated vapor pressure and temperature was fitted by using two Antoine equations and the Antoine constants were acquired for 4-fluorophthalic anhydride and 4-chlorophthalic anhydride, respectively. The semi-empirical method, Herington method was employed to test thermodynamic consistency of the vapor-liquid equilibrium data. The isobaric vapor-liquid phase equilibrium data were fitted with three thermodynamic models, which corresponded to Wilson, NRTL and UNIQUAC. The parameters of the three activity coefficient models were obtained by the method of nonlinear least-square regression. The calculated vapor-liquid phase equilibrium data with the three activity coefficient models agree very well with the experimental values.
Compounds
# Formula Name
1 C8H3FO3 5-fluoro-1,3-isobenzofurandione
2 C8H3ClO3 4-chlorophthalic anhydride
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 36
  • POMD
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 38
  • POMD
  • 2
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 44
  • POMD
  • 2
  • 1
  • Mole fraction - 1 ; Gas
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 44