Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Absorption of CO2 with methanol and ionic liquid mixture at low temperatures

Dai, C.[Chengna], Wei, W.[Wenjuan], Lei, Z.[Zhigang]
Fluid Phase Equilib. 2015, 391, 9-17
ABSTRACT
This work proposed the use of methanol (CH3OH) and ionic liquid (IL) mixture, which integrates the advantages of methanol (high solubility and low viscosity) and IL (non-volatility), for CO2 capture at low temperatures (down to 228.2 K). The solubility of CO2 in pure methanol, IL ([OMIM]+[Tf2N] ) and their mixture (80 wt% CH3OH+ 20 wt% IL, 50 wt% CH3OH+ 50 wt% IL, and 20 wt% CH3OH+ 80 wt% IL) was measured at 273.2, 258.2, 243.2 and 228.2 K and pressures up to 3.0 MPa. The UNIFAC model for ILs was extended to the methanol CO2 and methanol IL CO2 systems. The comparison between the predicted and experimental results indicated that the UNIFAC model can well predict the CO2 solubility in pure methanol and in the (methanol + IL) binary mixture at low temperatures. Based on the thermodynamic experimental and modeling studies, the conceptual process design was developed for CO2 removal from syngas using the mixed agent at a low temperature. It was found that the volatile loss of methanol in the absorption column and solvent flash tanks decreases significantly in the case of the mixture of methanol and IL used as an absorbent.
Compounds
# Formula Name
1 CH4O methanol
2 CO2 carbon dioxide
3 C14H23F6N3O4S2 1-octyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mole fraction - 2 ; Gas
  • Temperature, K; Gas
  • Mole fraction - 1; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 67
  • POMD
  • 1
  • 2
  • 3
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 1; Liquid
  • Mass fraction - 3; Liquid
  • Gas
  • Liquid
  • ISOPVT
  • 67
  • POMD
  • 1
  • 2
  • Mole fraction - 2 ; Gas
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 22
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • ISOPVT
  • 22
  • POMD
  • 2
  • 3
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 2; Liquid
  • Gas
  • Liquid
  • ISOPVT
  • 24