Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Thermo-physical properties of ammonium-based ionic liquid + N-methyl-2-pyrrolidone mixtures at 298.15 K

Usula, M.[Marianna], Matteoli, E.[Enrico], Leonelli, F.[Francesca], Mocci, F.[Francesca], Marincola, F. C.[Flaminia Cesare], Gontrani, L.[Lorenzo], Porcedda, S.[Silvia]
Fluid Phase Equilib. 2014, 383, 49-54
ABSTRACT
A systematic study of a series of room-temperature ionic liquids, belonging to the alkylammonium nitrate family (XAN), was carried out with the aim of investigating the effect of the cationic chain length on some thermo-physical properties and their behavior in the organic solvent N-methyl-2-pyrrolidone (NMP), over the whole concentration range. Experimental densities were used to calculate molar volumes, Vm, and excess molar volumes, VE. Complementary information was obtained by isothermal titration calorimetry that provided the values of the heat of mixing, HE, and the excess partial molar enthalpies of each component. The density values of neat XAN samples decreased as the alkyl chain length of the cation increases, whereas the addition of the methoxy group to the considered smaller alkyl chain resulted in an increase of density. Negative VE and HE values were found for each XAN+NMP system, indicating the presence of strong attracting interactions between the constituents.
Compounds
# Formula Name
1 C5H9NO N-methylpyrrolidone
2 C2H8N2O3 ethylammonium nitrate
3 C3H10N2O3 propylammonium nitrate
4 C4H12N2O3 n-butylammonium nitrate
5 C3H10N2O4 2-methoxyethylammonium nitrate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 20
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 16
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 13