Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Volumetric investigation of the ternary system ethanol + dimethylformamide + cyclohexane at 298.15 K

Gianni, P., Lepori, L., Matteoli, E., Righetti, M. C.
Fluid Phase Equilib. 2014, 368, 112-119
ABSTRACT
Density measurements have been carried out by means of a vibrating tube densimeter for the ternary system ethanol (EtOH) + dimethylformamide (DMF) + cyclohexane (CyH) and for the binary mixture DMF + CyH. Molar excess volumes VE at 298.15 K, as well as excess apparent molar volumes of the components, have been obtained from the measured quantities. A large miscibility gap is exhibited by DMF + CyH and by the ternary mixtures in the region near this binary. The VEs are largely positive for DMF + CyH and EtOH + CyH, while slightly negative for EtOH + DMF. The VE s of the ternary mixtures are always positive except in a narrow strip in the proximity of the binary EtOH + DMF. The positive sign of VE (as well as for GE and HE) for EtOH + CyH and DMF + CyH, and for large portions of the ternary domain, can be qualitatively explained with a net destruction in the mixing process of H-bonding in EtOH and of dipolar interactions in DMF. The behavior of E OV ,i of single components confirms that the self-association of EtOH or DMF is the largest in the pure liquids and the least in dilute solution, and that the unlike association EtOH-DMF in the ternary mixtures produces a volume contraction which increases with increasing content of each of the polar components.
Compounds
# Formula Name
1 C2H6O ethanol
2 C3H7NO dimethylformamide
3 C6H12 cyclohexane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 17
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 112