Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

(p, VE, T) Measurements of mixtures (DBE + alcohol) at temperaturesfrom (293.15 to 353.15) K and at pressures up to 140 MPa

Alaoui, F. E. M.[Fatima E.M.], Montero, E. A.[Eduardo A.], Bazile, J.-P.[Jean-Patrick], Aguilar, F.[Fernando], Boned, C.[Christian]
Fluid Phase Equilib. 2014, 363, 131-148
ABSTRACT
This work reports new experimental density data (960 points) for 1-propanol and for binary mixturesof dibutyl ether + 1-propanol, + 2-propanol and + 1-hexanol over the full composition range (5 compositions; 0.15 less than dibutyl ether mole fraction x less than 0.85), between 293.15 and 353.15 K (every 20 K), and for 15 pressures from 0.1 MPa up to 140 MPa (every 10 MPa). An Anton Paar vibrating tube densimeter, calibrated with an uncertainty of +-0.5 kg/m^3 was used to perform these measurements. The experimental density data were fitted with a Tait-like equation with low standard deviations. Excess volumes have been calculated from the experimental data and fitted by the Redlich-Kister equation. In addition, the isobaric thermal expansivity and the isothermal compressibility have been derived from the Tait-like equation.
Compounds
# Formula Name
1 C8H18O dibutyl ether
2 C3H8O propan-1-ol
3 C3H8O propan-2-ol
4 C6H14O hexan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 60
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Vibrating tube method
  • 300
  • POMD
  • 4
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Vibrating tube method
  • 300
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Vibrating tube method
  • 300