Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Vapor-liquid equilibria of binary systems composed of polyoxyethylene 4-octylphenyl ether and alcohols: Experimental measurements and correlation

Khoiroh, I.[Ianatul], Lee, M. J.[Ming-Jer]
Fluid Phase Equilib. 2013, 360, 111-117
ABSTRACT
Isothermal vapor-liquid equilibrium (VLE) data of polyoxyethylene 4-octylphenyl ether (POEOPE) with 2-butanol, tert-butanol, or 1-pentanol have been measured by using an autoclave apparatus. The temperature range is from 321.0 K to 424.5 K and POEOPE content ranging from 0.100 to 0.432 in mole fraction. The raw VLE data were fitted accurately to the Antoine equation. The validity of local composition models, the NRTL and the UNIQUAC, were tested by using the experimental data. It is shown that the VLE data are well represented by using both two models. The UNIQUAC correlates the data slightly better, with an average absolute relative deviation (AARD) of 3.3 %, while that of the NRTL is 4.7 %. Those VLE data were further used to calculate solvent activities and compared with the calculated values from the UNIQUAC and the NRTL models.
Compounds
# Formula Name
1 C4H10O butan-2-ol
2 C4H10O 2-methylpropan-2-ol
3 C5H12O pentan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 10
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 9
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 10