Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Thermochemical and vapor pressure behavior of anthracene and brominated anthracene mixtures

Fu, J.[Jinxia], Suuberg, E. M. [Eric M.]
Fluid Phase Equilib. 2013, 342, 60-70
ABSTRACT
The present work concerns the thermochemical and vapor pressure behavior of the anthracene (1) + 2- bromoanthracene (2) and anthracene (1) + 9-bromoanthracene (3) systems. Solid liquid equilibrium temperature and differential scanning calorimetry studies indicate the existence of a minimum melting solid state near an equilibrium temperature of 477.65 K at x1 = 0.74 for the (1) + (2) system. Additionally, solid vapor equilibrium studies for the (1) + (2) system show that the vapor pressure of the mixtures depends on composition, but does not follow ideal Raoult s law behavior. The (1) + (3) system behaves differently from the (1) + (2) system. The (1) + (3) system has a solid solution like phase diagram. The system consists of two phases, an anthracene like phase and a 9-bromoanthracene like phase, while (1) + (2) mixtures only form a single phase. Moreover, experimental studies of the two systems suggest that the (1) + (2) system is in a thermodynamically lower energy state than the (1) + (3) system.
Compounds
# Formula Name
1 C14H10 anthracene
2 C14H9Br anthracene, 2-bromo-
3 C14H9Br 9-bromoanthracene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 6
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 12
  • POMD
  • 3
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS
  • 1
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 9
  • POMD
  • 1
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal
  • VISOBS
  • 18
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal
  • VISOBS
  • 11