Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Experimental determination and theoretical modeling of the vapor liquid equilibrium and densities of the binary system butan-2-ol + tetrahydro-2H-pyran

Quinteros-Lama, H.[Hector], Cartes, M.[Marcela], Mejia, A.[Andres], Segura, H.[Hugo]
Fluid Phase Equilib. 2013, 342, 52-59
ABSTRACT
Isobaric vapor liquid equilibrium (VLE) data have been measured for the binary system butan-2- ol + tetrahydro-2H-pyran at 50, 75, and 94 kPa and over the temperature range from 339 to 370 K using a vapor liquid equilibrium still with circulation of both phases. Mixing volumes were also determined at 298.15 K and atmospheric pressure with a vibrating tube densimeter. According to experimental results, the zeotropic mixture exhibits slight positive deviation from ideal behavior over the experimental range. The excess molar volumes ( vE) of the system are positive over the whole mole fraction range. The VLE data of the binary mixture satisfy the Fredenlund s consistency test and were well-correlated by the Wohl, nonrandom two-liquid (NRTL), Wilson, and universal quasichemical (UNIQUAC) equations for all of the measured isobars. The vE, in turn, were satisfactorily correlated using a second order Redlich Kister equation. The theoretical modeling of the measured VLE and vE data has been carried out using the polar perturbed chain statistical association fluid theory (PPC-SAFT) equation of state. In this molecular based approach, butan-2-ol was described as a polar auto-associating molecule, while tetrahydro-2H-pyran is treated as polar molecule. Molecular interactions between these two components have been approximated in terms of a hetero-association theory. It is demonstrated that a common set of parameters is able to simultaneously reproduce with good agreement both phase equilibrium and excess molar volumes measurements.
Compounds
# Formula Name
1 C4H10O butan-2-ol
2 C5H10O tetrahydropyran
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Normal boiling temperature, K ; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Normal boiling temperature, K ; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 1
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 62
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 62
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 21