Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Solid liquid equilibrium in ternary mixtures of ethyl oleate, ethyl laurate and ethyl palmitate

Robustillo, M. D.[Maria Dolores], Barbosa, D. F.[Deise Fernanda], Meirelles, A. J. A.[Antonio J. A.], Filho, P. d. A. P.[Pedro de Alcantara Pessoa]
Fluid Phase Equilib. 2013, 339, 58-66
ABSTRACT
Biodiesel is a liquid mixture of fatty acid esters obtained through the reaction between fats or oils and alcohols. At low temperatures, the esters that constitute biodiesel tend to crystallize, which may be particularly critical for the biodiesel produced from ethanol, process little used or studied, although promising, since ethanol can also be obtained from biomass sources. In this work, an experimental study of solid liquid equilibrium of ternary mixtures of ethyl oleate, ethyl laurate and ethyl palmitate was carried out using differential scanning calorimetry. Experimental results show that no eutectic composition is observed for ternary systems, although binary systems formed by ethyl oleate and ethyl laurate as well as ethyl laurate and ethyl palmitate present eutectic points at approximately 80% M ethyl oleate and 90% M ethyl laurate, respectively, indicating immiscibility in solid phase. The difference between the melting points in the case of the system ethyl oleate and ethyl palmitate causes ethyl oleate to act primarily as a solvent, being thus difficult to observe the eutectic point for this binary. Such results show that the solid liquid phase equilibrium of these ternary mixtures cannot be seen as a simple extension of the solid liquid equilibrium of the binary mixtures. The experimental results were also modeled considering that the liquid phase can be described by the Flory Huggins activity model, with excellent agreement.
Compounds
# Formula Name
1 C20H38O2 ethyl (Z)-9-octadeceneoate
2 C14H28O2 ethyl dodecanoate
3 C18H36O2 ethyl hexadecanoate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 2
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 3
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 3
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 2
  • 1
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • DTA
  • 8
  • POMD
  • 2
  • 1
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • DTA
  • 2
  • POMD
  • 2
  • 1
  • Eutectic temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Crystal - 2
  • Crystal - 1
  • DTA
  • 1
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • DTA
  • 11
  • POMD
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • DTA
  • 1
  • POMD
  • 2
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • DTA
  • 9
  • POMD
  • 2
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • DTA
  • 2
  • POMD
  • 2
  • 3
  • Eutectic temperature, K ; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Crystal - 2
  • Crystal - 3
  • DTA
  • 1
  • POMD
  • 2
  • 1
  • 3
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal
  • DTA
  • 36