Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Vapour liquid equilibria and excess enthalpies of the binary mixtures 1-pentanol with 2,2,4-trimethylpentane or n-heptane

Moreau, A.[Alejandro], Martin, M. C., Aguilar, F.[Fernando], Segovia, J. J.[Jose J.]
Fluid Phase Equilib. 2013, 338, 95-99
ABSTRACT
Accurate experimental data of vapour liquid equilibria (VLE) and excess enthalpies are reported for the binary systems (1-pentanol + 2,2,4-trimethylpentane) and (1-pentanol + n-heptane). An isothermal total pressure cell was used for measuring the VLE at T = 313.15 K. The data were correlated using Margules, Wilson, NRTL and UNIQUAC equations. The enthalpies of mixing were measured at two different temperatures T = (298.15 and 313.15) K using an isothermal flow calorimeter and were correlated by the Redlich Kister equation. The thermodynamic behaviour is discussed.
Compounds
# Formula Name
1 C5H12O pentan-1-ol
2 C8H18 2,2,4-trimethylpentane
3 C7H16 heptane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Density calibration data
  • 26
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 26
  • POMD
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 42
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Density calibration data
  • 24
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 24
  • POMD
  • 1
  • 3
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 42