Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Isobaric vapor-liquid equilibrium of binary systems of decane with p-, o-, m-xylene at 20 kPa

Yang, S.[Shengkai], Wang, Y.[Yujie], Wang, X.[Xuejing], Zhu, Y.[Yong], Chen, N.[Na]
Fluid Phase Equilib. 2013, 337, 109-114
ABSTRACT
Isobaric vapor-liquid equilibrium (VLE) data were determined at the pressure of 20 kPa for the three binary mixtures composed of decane + p, o, m-xylene by using a recirculation type still. All the data passed the thermodynamic consistency test and no azeotropic behavior was observed. The experimental results were used as a basis to check the validity of two predictive models, the UNIFAC and the conductorlike screening model for realistic solvents (COSMO-RS). These new VLE data were also correlated with the van Laar, Wilson, the NRTL, and the UNIQUAC activity coefficient models.
Compounds
# Formula Name
1 C10H22 decane
2 C8H10 1,4-dimethylbenzene
3 C8H10 1,2-dimethylbenzene
4 C8H10 1,3-dimethylbenzene
5 C6H6 benzene
6 C7H8 toluene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 5
  • 6
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 14
  • POMD
  • 5
  • 6
  • Mole fraction - 5 ; Gas
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 14
  • POMD
  • 2
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 13
  • POMD
  • 2
  • 1
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 13
  • POMD
  • 3
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 13
  • POMD
  • 3
  • 1
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 13
  • POMD
  • 4
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 14
  • POMD
  • 4
  • 1
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 14