Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Excess molar volumes, excess molar enthalpies and refractive index deviations for binary mixtures of propan-1-ol, butan-1-ol and pentan-1-ol with 2,2,4-trimethylpentane at 298.15 K

Faneite, A. M.[Alexis M.], Garces, S. I.[Siby I.], Aular, J. A.[Jorge A.], Urdaneta, M. R.[Mario R.], Soto, D.[Diana]
Fluid Phase Equilib. 2012, 334, 117-127
ABSTRACT
Density, refractive index, and molar excess enthalpy of binary mixtures of propan-1-ol with 2,2,4-trimethylpentane, butan-1-ol with 2,2,4-trimethylpentane and pentan-1-ol with 2,2,4-trimethylpentane at 298.15 K and ambient pressure have been experimentally measured in the whole composition range. Excess molar volumes, deviation of refractive indices, deviations of molar refraction and molar excess enthalpy data were correlated with Redlich-Kister equation. Refractive indexes estimates were carried out using several mixing rules. An estimation of density of the binary mixture was performed using the equation suggested by Nakata and Sakurai [35] using the Lorentz-Lorenz refractive index mixing rule with densities and refractive indexes of the pure substances. Wilson and Non Random Two Liquids (NRTL) models were applied for molar excess enthalpy correlation. The Prigogine-Flory-Patterson (PFP) and Extended Real Association Solution (ERAS) theories have been used to correlate the excess molar volumes of the mixtures. The behavior of the thermophysical properties was analyzed in terms of the length of the alkanol chain and the balance between positive and negative deviations of the ideality.
Compounds
# Formula Name
1 C3H8O propan-1-ol
2 C4H10O butan-1-ol
3 C5H12O pentan-1-ol
4 C8H18 2,2,4-trimethylpentane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 1
  • 4
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • solution calorimetry
  • 13
  • POMD
  • 1
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 13
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 13
  • POMD
  • 2
  • 4
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • solution calorimetry
  • 13
  • POMD
  • 2
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 13
  • POMD
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 13
  • POMD
  • 3
  • 4
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • solution calorimetry
  • 13
  • POMD
  • 3
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 13
  • POMD
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 13