Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Surface tensions of aqueous solutions of lithium dodecyl sulfate, sodium oleate, and dodecylbenzene sulfonic acid in contact with methane under hydrate-forming conditions

Ando, N.[Naoki], Kuwabara, Y.[Yui], Kodama, T.[Takehide], Mori, Y. H.[Yasuhiko H.]
Fluid Phase Equilib. 2012, 314, 146-151
ABSTRACT
This paper presents experimental surface tension data of separate aqueous solutions of lithium dodecyl sulfate, sodium oleate, and dodecylbenzene sulfonic acid, each in contact with methane at a pressure of 3.90 MPa or 4.00 MPa and a temperature of 275 K (i.e., a condition in which a clathrate hydrate of methane is thermodynamically stable). These data were obtained by use of the pendant drop method in the metastable absence of any hydrate in the experimental system (i.e., every measurement was accomplished during the induction time for the hydrate formation). The surfactant concentration ranged up to 5.0 g kg-1 for lithium dodecyl sulfate, 0.6 g kg-1 for sodium oleate, and 1.0 g kg-1 for dodecylbenzene sulfonic acid. Based on the obtained surface-tension versus surfactantconcentration data, we estimated the critical micelle concentrations for lithium dodecyl sulfate, sodium oleate and dodecylbenzene sulfonic acid to be about 3.2 g kg-1, 0.12 g kg-1 and 0.39 g kg-1, respectively.
Compounds
# Formula Name
1 C12H25LiO4S lithium dodecyl sulfate
2 H2O water
3 CH4 methane
4 C18H33NaO2 sodium oleate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Surface tension liquid-gas, N/m ; Liquid
  • Mass ratio of solute to solvent - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Pendant drop shape
  • 9
  • POMD
  • 3
  • 1
  • 2
  • Surface tension liquid-gas, N/m ; Liquid
  • Mass ratio of solute to solvent - 1; Liquid
  • Temperature, K; Gas
  • Pressure, kPa; Gas
  • Liquid
  • Gas
  • Pendant drop shape
  • 13
  • POMD
  • 3
  • 4
  • 2
  • Surface tension liquid-gas, N/m ; Liquid
  • Mass ratio of solute to solvent - 4; Liquid
  • Temperature, K; Gas
  • Pressure, kPa; Gas
  • Liquid
  • Gas
  • Pendant drop shape
  • 9