Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Electrical conductivity investigation of diluted potassium chloride solutions in binary mixture triethylamine-water near its consolute point

Toumi, A., Hafaiedh, N., Bouanz, M.
Fluid Phase Equilib. 2011, 305, 2, 185-191
ABSTRACT
The binary liquid mixture of triethylamine + water (TEA-W) has a lower consolute point at a critical composition of 32.27 mass % triethylamine. Starting at a temperature within the one-phase region, the electrical conductivity of a sample of this mixture with addition of (K+, Cl-) ions was measured and found to be accurately described by the Vogel-Fulcher-Tammann (VFT) law. Before that, for the pure system, in a temperature range delta-T = Tc -.T less than 2 deg C where Tc is the critical temperature, the electrical conductivity exhibits a monotonous deviation from the VFT behaviour. This anomaly is finite at Tc. The asymptotic behaviour of the electrical conductivity anomaly is described by a power law t^(1-alpha), where t is the absolute value of reduced temperature (T- Tc)/Tc and alpha is the critical exponent of the specific heat anomaly at constant pressure. For the electrolyte mixtures, by combining the viscosity and the electrical conductivity data, the value of the computed Walden product has been determined and the salt dissociation degrees as well as the Debye screening length have been estimated.
Compounds
# Formula Name
1 ClK potassium chloride
2 C6H15N triethylamine
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass fraction - 2; Liquid
  • Liquid
  • Phywe conductometer
  • 29
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass fraction - 2; Liquid
  • Liquid
  • Vibrating tube method
  • 29
  • POMD
  • 2
  • 1
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Phywe conductometer
  • 90
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Liquid
  • Vibrating tube method
  • 90