Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Thermophysical properties of pure 1-ethyl-3-methylimidazolium methylsulfate and its binary mixtures with alcohols

Wang, J.-y.[Jian-ying], Zhao, F.-y.[Feng-yun], Liu, Y.-M.[Yu-Min], Wang, X.-l.[Xiao-ling], Hu, Y.-Q.[Yong-Qi]
Fluid Phase Equilib. 2011, 305, 2, 114-120
ABSTRACT
The density and surface tension of 1-ethyl-3-methylimidazolium methylsulfate, [EMIM][CH3SO4] ionic liquid have been measured from (283.15 to 333.15) K. The coefficient of thermal expansion was calculated from the experimental density results using an empirical correlation for T = (283.15 to 338.15) K. Molecular volume and standard entropies of [EMIM][CH3SO4] ionic liquid were obtained from the experimental density values. The surface properties, critical temperature and enthalpy of vaporization were also discussed. Density and surface tension have been measured over the whole composition range for [EMIM][CH3SO4] with alcohols (methanol, ethanol, 1-butanol) binary systems at 298.15 K and atmospheric pressure. Excess molar volumes and surface tension deviations for the binary systems have been calculated and were fitted to a Redlich-Kister equation to determine the fitting parameters and the root mean square deviations.
Compounds
# Formula Name
1 CH4O methanol
2 C2H6O ethanol
3 C4H10O butan-1-ol
4 C7H14N2O4S 1-ethyl-3-methylimidazolium methylsulfate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 4
  • Surface tension liquid-gas, N/m ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Plate tensiometer
  • 11
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 11
  • POMD
  • 1
  • 4
  • Surface tension liquid-gas, N/m ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Plate tensiometer
  • 14
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 14
  • POMD
  • 2
  • 4
  • Surface tension liquid-gas, N/m ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Plate tensiometer
  • 14
  • POMD
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 14
  • POMD
  • 3
  • 4
  • Surface tension liquid-gas, N/m ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Air at 1 atmosphere
  • Ring tensiometer
  • 14
  • POMD
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 13