Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Thermophysical properties of dimethylsulfoxide with ionic liquids at various temperatures

Govinda, V.[Varadhi], Attri, P.[Pankaj], Venkatesu, P., Venkateswarlu, P.
Fluid Phase Equilib. 2011, 304, 1-2, 35-43
ABSTRACT
In this article, we present densities, ultrasonic sound velocities and viscosities for the binary systems of the highly polar compound dimethylsulfoxide (DMSO) with ionic liquids (ILs) over the whole composition range at temperature ranging from 298.15 to 328.15 K under atmospheric pressure. The ILs investigated in the present study included diethyl ammonium hydrogen sulfate ([Et2NH][HSO4], DEAS) is an ammonium salt (protic IL) and 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) is an imidazolium salt (aprotic IL). Further, to gain some insight into the several aggregations of molecular interactions present in these mixed solvents, we predicted the excess molar volume (VE), the deviation in isentropic compressibilities and deviation in viscosity as a function of the concentration of IL using the measured properties of density, ultrasonic sound velocity and viscosity, respectively. Redlich-Kister polynomial was used to correlate the results. The intermolecular interactions and structural effects were analyzed on the basis of the measured and the derived properties. A qualitative analysis of the results is discussed in terms of the ion-dipole, ion-pair interactions, and hydrogen bonding between ILs and DMSO molecules and their structural factors. Comparison of these properties of DMSO with ILs explicitly elucidates the influence of ions and also the temperature effects on the thermophysical properties.
Compounds
# Formula Name
1 C2H6OS dimethyl sulfoxide
2 C8H15ClN2 1-butyl-3-methylimidazolium chloride
3 C4H13NO4S diethylammonium hydrogen sulfate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBWIR:UFactor:16
  • 5
  • POMD
  • 1
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • FPINT:UFactor:12
  • 5
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 5
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBWIR:UFactor:16
  • 5
  • POMD
  • 2
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • FPINT:UFactor:12
  • 5
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 5
  • POMD
  • 3
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • VISOBS
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Metastable liquid
  • VIBTUB:UFactor:12
  • 5
  • POMD
  • 3
  • Speed of sound, m/s ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Frequency, MHz; Metastable liquid
  • Metastable liquid
  • FPINT:UFactor:12
  • 5
  • POMD
  • 3
  • Viscosity, Pa*s ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Metastable liquid
  • VIBWIR:UFactor:16
  • 5
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBWIR:UFactor:16
  • 75
  • POMD
  • 1
  • 2
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • FPINT:UFactor:12
  • 75
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 75
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:12
  • 75
  • POMD
  • 1
  • 3
  • Speed of sound, m/s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • FPINT:UFactor:12
  • 75
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBWIR:UFactor:16
  • 75