Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

The solid-liquid equilibrium of the binary system H2O-DMSO and the influence of a salt (NaCl, KCl) on the thermodynamic behavior Correlations using a revised LIQUAC model

Mohs, A.[Andre], Decker, S.[Sebastian], Gmehling, J.[Jurgen]
Fluid Phase Equilib. 2011, 304, 1-2, 12-20
ABSTRACT
The solid-liquid equilibrium of the binary system water (H2O) + dimethyl sulfoxide (DMSO) is investigated and the results are compared to experimental values to ensure that the applied measurement procedure provides reliable results. After that, the freezing point depression of water is measured in the presence of different amounts of salt. Furthermore, solubility measurements are carried out and compared to published experimental data to show that the apparatus used is also capable to provide reliable results for salt solubilities. Afterwards the ternary system is investigated using this measurement procedure to determine the solubilities of the salt in the mixed solvent system as well as the freezing point depression of the mixed solvents after the addition of salt. Two salts are investigated, sodium chloride (NaCl) and potassium chloride (KCl). Most of the measured ternary data seems to be reported for the first time. A correlation of the experimental results is also carried out using a revised version of the electrolyte model LIQUAC.
Compounds
# Formula Name
1 C2H6OS dimethyl sulfoxide
2 ClNa sodium chloride
3 ClK potassium chloride
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 4
  • Molality, mol/kg - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Residual mass after drying
  • 49
  • POMD
  • 1
  • 2
  • 4
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Solvent: Mole fraction - 4; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 4
  • VISOBS
  • 29
  • POMD
  • 1
  • 2
  • 4
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Solvent: Mole fraction - 4; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • VISOBS
  • 17
  • POMD
  • 1
  • 3
  • 4
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Residual mass after drying
  • 16
  • POMD
  • 1
  • 3
  • 4
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Solvent: Mole fraction - 4; Liquid
  • Molality, mol/kg - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 4
  • VISOBS
  • 10