Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Measurement and correlation of solubilities of C.I. Disperse Red 73, C.I. Disperse Yellow 119 and their mixture in supercritical carbon dioxide

Dong, P.[Ping], Xu, M.[Mingxian], Lu, X.[Xueyan], Lin, C.[Chunmian]
Fluid Phase Equilib. 2010, 297, 1, 46-51
ABSTRACT
The solubilities of disperse dyes and their mixture in supercritical carbon dioxide are important to the fundamental research and development of supercritical fluid dyeing (SFD). The solubilities of Disperse Red 73, Disperse Yellow 119 and their mixture in supercritical carbon dioxide were measured in the temperature range from 343 to 383 K and pressures from 12 to 28 MPa by a static-recirculation method. The results show that over the entire range of experimental conditions in the binary (Disperse Red 73 + CO2 and Disperse Yellow 119 + CO2) and ternary (Disperse Red 73 + Disperse Yellow 119 + CO2) systems, the solubilities increased with increasing pressure and temperature and were clearly affected by the molecular polarity of the dyes. A co-solvent effect and a competing dissolution effect existing in the ternary system led to the increase and decrease in the solubilities of Disperse Yellow 119 and Disperse Red 73, respectively. The solubility data of the two dyes and their mixture were correlated with two empirical models the Chrastil and the Mendez-Santiago/Teja (MT) model.
Compounds
# Formula Name
1 C20H21BrN6O3 N-(2-((2-bromo-6-cyano-4-nitrophenyl)diazenyl)-5-(diethylamino)phenyl)propionamide
2 CO2 carbon dioxide
3 C18H16N6O2 2-((4-((2-cyanoethyl)(ethyl)amino)phenyl)diazenyl)-5-nitrobenzonitrile
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 1
  • Mole fraction - 1 ; Crystal - 1
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Pressure, kPa; Fluid (supercritical or subcritical phases)
  • Crystal - 1
  • Fluid (supercritical or subcritical phases)
  • Spectrometry
  • 15
  • POMD
  • 2
  • 3
  • Mole fraction - 3 ; Crystal - 3
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Pressure, kPa; Fluid (supercritical or subcritical phases)
  • Crystal - 3
  • Fluid (supercritical or subcritical phases)
  • Spectrometry
  • 15
  • POMD
  • 2
  • 1
  • 3
  • Mole fraction - 1 ; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Pressure, kPa; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 1
  • Crystal - 3
  • Spectrometry
  • 15
  • POMD
  • 2
  • 1
  • 3
  • Mole fraction - 3 ; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Pressure, kPa; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 1
  • Crystal - 3
  • Spectrometry
  • 15