Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Temperatures of liquid-liquid separation and excess molar volumes of {N-methylpiperidine-water} and {2-methylpiperidine-water} systems

Coulier, Y., Ballerat-Busserolles, K., Rodier, L., Coxam, J.-Y.
Fluid Phase Equilib. 2010, 296, 2, 206-212
ABSTRACT
Partial miscibility in binary systems {N-methylpiperidine water} and {2-methylpiperidine water} was studied. The temperatures of liquid-liquid separation were determined as function of composition using both calorimetric technique and phase equilibrium cell. The densities of {amine water} mixtures were determined in the domain of total miscibility at temperatures between 288 K and 338 K. Excess molar volumes were derived from experimental density data and fit to a Redlich Kister polynomial.
Compounds
# Formula Name
1 C6H13N N-methylpiperidine
2 C6H13N 2-methylpiperidine
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 6
  • POMD
  • 1
  • Molar volume, m3/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 6
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 6
  • POMD
  • 2
  • Molar volume, m3/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 6
  • POMD
  • 1
  • 3
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • VISOBS
  • 4
  • POMD
  • 1
  • 3
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • microDSC
  • 15
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 60
  • POMD
  • 1
  • 3
  • Excess molar volume, m3/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Calculated with densities of this investigation
  • 60
  • POMD
  • 2
  • 3
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 2; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • VISOBS
  • 5
  • POMD
  • 2
  • 3
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 2; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • microDSC
  • 2
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 52
  • POMD
  • 2
  • 3
  • Excess molar volume, m3/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Calculated with densities of this investigation
  • 52