Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

(Solid + liquid) and (liquid + liquid) phase equilibria measurements and correlation of the binary systems {tri-iso-butyl(methyl)phosphonium tosylate + alcohol, or +hydrocarbon}

Domanska, U.[Urszula], Paduszynski, K.[Kamil]
Fluid Phase Equilib. 2009, 278, 1-2, 90-96
ABSTRACT
Phase diagrams for the binary systems {tri-iso-butyl(methyl)phosphonium tosylate ionic liquid (i- B3MPTOS+ 1-alcohol, or n-alkane, or n-alkylbenzene} have been measured at atmospheric pressure by a dynamic method. (Solid + liquid) phase equilibria were measured for systems of alcohols (1-decanol and 1-dodecanol) and the ionic liquid and (liquid + liquid) phase equilibria for binaries containing hydrocarbons (n-hexane, n-heptane, n-octane, n-nonane, n-decane, toluene, ethylbenzene, n-propylbenzene, n-butylbenzene). The reduction of experimental data has been carried out by correlation using the Non- Random Two Liquid (NRTL) equation. The measured diagrams have been compared with analogous diagrams reported previously for systems with ionic liquids containing the symmetric quaternary phosphonium cation. The influence of the asymmetry of the cation on the phase behaviour of phosphonium ionic liquids has been discussed.
Compounds
# Formula Name
1 C20H37O3PS triisobutylmethylphosphonium p-toluenesulfonate
2 C10H22O decan-1-ol
3 C12H26O dodecan-1-ol
4 C7H16 heptane
5 C8H18 octane
6 C9H20 nonane
7 C10H22 decane
8 C6H14 hexane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Triple point temperature, K ; Glass
  • Glass
  • Liquid
  • Air at 1 atmosphere
  • DTA:corrimp
  • 1
  • POMD
  • 2
  • 1
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal 1 - 2
  • VISOBS:corrimp
  • 10
  • POMD
  • 3
  • 1
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal 1 - 3
  • VISOBS:corrimp
  • 16
  • POMD
  • 8
  • 1
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • VISOBS
  • 7
  • POMD
  • 5
  • 1
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • VISOBS
  • 10
  • POMD
  • 6
  • 1
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • VISOBS:UFactor:4
  • 9
  • POMD
  • 7
  • 1
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • VISOBS:UFactor:4
  • 7
  • POMD
  • 4
  • 1
  • Liquid-liquid equilibrium temperature, K ; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • VISOBS:UFactor:4
  • 11