Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Measurement and prediction of tie-line data for mixtures of (water + 1-propanol + diisopropyl ether): LLE diagrams as a function of temperature

Ghanadzadeh, H., Ghanadzadeh, A., Bahrpaima, K.[Kh.]
Fluid Phase Equilib. 2009, 277, 2, 126-130
ABSTRACT
Tie-line data for ternary system of (water + 1-propanol + diisopropyl ether (DIPE)) were determined at T = (298.2, 308.2 and 313.2)K under atmospheric conditions. The ternary system exhibited type-I LLE behavior, as (DIPE +water) is the only liquid pair that is partially miscible. The experimental data for this system were predicted with the UNIFAC model with a root mean square deviation of 2.64%. The reliability of the experimental tie-line data was determined through the Othmer Tobias and Hand plots. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvents. The influence of temperature effect on the equilibrium characteristics and separation factor was found to be significant at the temperatures studied.
Compounds
# Formula Name
1 H2O water
2 C3H8O propan-1-ol
3 C6H14O diisopropyl ether
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • 1
  • Mole fraction - 1 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • 3
  • POMD
  • 3
  • 1
  • Mole fraction - 1 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Chromatography
  • 3
  • POMD
  • 2
  • 3
  • 1
  • Mass fraction - 2 ; Liquid mixture 1
  • Mole fraction - 2 ; Liquid mixture 2
  • Mole fraction - 1 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Mole fraction - 1; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • Chromatography
  • Chromatography
  • 21