Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Vapor liquid equilibrium for binary system of thiophene + 2,2,4-trimethylpentane at 343.15 and 353.15K and thiophene + 2-ethoxy-2-methylpropane at 333.15 and 343.15K

Sapei, E.[Erlin], Zaytseva, A.[Anna], Uusi-Kyyny, P.[Petri], Keskinen, K. I.[Kari I.], Aittamaa, J.[Juhani]
Fluid Phase Equilib. 2007, 261, 1-2, 115-121
ABSTRACT
Isothermal vapor liquid equilibrium (VLE) for thiophene + 2,2,4-trimethylpentane were measured at 343.15 and 353.15K and thiophene + 2- ethoxy-2-methylpropane were measured at 333.15 and 343.15K with a circulation still. Maximum pressure azeotropes were found in thiophene + 2,2,4-trimethylpentane systems, whereas thiophene + 2-ethoxy-2-methylpropane systems exhibit slight positive deviation from ideality. No azeotropic behavior was found in thiophene + 2-ethoxy-2-methylpropane systems. The experimental results were correlated with the Wilson model and also compared with the original UNIFAC, UNIFAC-Dortmund, and the COSMO-RS predictive models. Analyses of liquid and vapor phase composition were determined with gas chromatography. All VLE measurements passed the used thermodynamic consistency tests (integral, infinite dilution and point test).
Compounds
# Formula Name
1 C4H4S thiophene
2 C8H18 2,2,4-trimethylpentane
3 C6H14O 2-ethoxy-2-methylpropane
4 C7H8 toluene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 37
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • Chromatography
  • 37
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 35
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • Chromatography
  • 35