Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Vapor liquid equilibrium for binary system of diethyl sulfide + cyclohexane at 353.15 and 343.15 K and diethyl sulfide + 2-ethoxy-2-methylpropane at 343.15 and 333.15 K

Sapei, E.[Erlin], Zaytseva, A.[Anna], Uusi-Kyyny, P.[Petri], Keskinen, K. I.[Kari I.], Aittamaa, J.[Juhani]
Fluid Phase Equilib. 2007, 252, 1-2, 130-136
ABSTRACT
Isothermal vapor liquid equilibrium (VLE) for diethyl sulfide + cyclohexane were measured at 353.15 and 343.15K and diethyl sulfide + 2- ethoxy-2-methylpropane were measured at 343.15 and 333.15K with a circulation still. All systems exhibit slight positive deviation from ideality. No azeotropic behavior was found in any of the systems studied. The experimental results were correlated with the Wilson model with temperature dependent parameters and also compared with the original UNIFAC, and the COSMO-RS predictive models. The measured diethyl sulfide + cyclohexane VLE have been used simultaneously with the excess enthalpy from literature for a correlation of temperature-dependentWilson parameters. Excess molar enthalpies at 298.15K for diethyl sulfide + 2-ethoxy-2-methylpropane system were calculated from the VLE data. Analyses of liquid and vapor-phase composition were determined with gas chromatography. AllVLEmeasurements passed the used thermodynamic consistency tests (integral, infinite dilution and point test).
Compounds
# Formula Name
1 C4H10S 3-thiapentane
2 C6H12 cyclohexane
3 C7H8 toluene
4 C6H14O 2-ethoxy-2-methylpropane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 3
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 10
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 10
  • POMD
  • 2
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 30
  • POMD
  • 2
  • 1
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • Chromatography
  • 30
  • POMD
  • 1
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 28
  • POMD
  • 1
  • 4
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • Chromatography
  • 28