Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Excess volumes and excess enthalpies of N-methyl-2-pyrrolidone with branched alcohols

Gnanakumari, P., Venkatesu, P., Mohan, K. R., Rao, M. V. P.[Murari Venkata Prabhakara], Prasad, D. H. L.
Fluid Phase Equilib. 2007, 252, 1-2, 137-142
ABSTRACT
Excess molar volumes (VE) at 303.15K and excess enthalpies (HE) at 298.15K and ambient pressure have been measured as a function of composition for the binary liquid mixtures of N-methyl-2-pyrrolidone (NMP) with branched alcohols. The branched alcohols include 2-propanol, 2-butanol, 2-methyl-1-propanol, 2-methyl-2-propanol and 3-methyl-1-butanol. The VE values were measured using a dilatometer and are negative over the entire mole fraction range for all the systems. The HE values for the above mixtures have been measured by a Paar 1451 solution calorimeter and are positive over the whole range of compassion. The experimental results have been correlated using Redilich Kister polynomials and the results are interpreted on the basis of possible hydrogen bonding between unlike molecules and changes in molecular association equilibria as well as structural effects for these systems.
Compounds
# Formula Name
1 C3H8O propan-2-ol
2 C4H10O butan-2-ol
3 C4H10O 2-methyl-1-propanol
4 C4H10O 2-methylpropan-2-ol
5 C5H12O 3-methylbutan-1-ol
6 C5H9NO N-methylpyrrolidone
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 6
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 6
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 1
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CALVET:UFactor:4
  • 12
  • POMD
  • 1
  • 6
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Direct dilatometry
  • 9
  • POMD
  • 2
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CALVET:UFactor:4
  • 12
  • POMD
  • 2
  • 6
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Direct dilatometry
  • 11
  • POMD
  • 3
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CALVET:UFactor:4
  • 15
  • POMD
  • 3
  • 6
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Direct dilatometry
  • 9
  • POMD
  • 4
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CALVET:UFactor:4
  • 14
  • POMD
  • 4
  • 6
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Direct dilatometry
  • 11
  • POMD
  • 5
  • 6
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CALVET:UFactor:4
  • 16
  • POMD
  • 5
  • 6
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Direct dilatometry
  • 9