Thermodynamics Research Center / ThermoML | Fluid Phase Equilibria

Phase equilibria properties of binary and ternary systems containing di-isopropyl ether + isobutanol + benzene at 313.15K

Villamanan, R. M., Chamorro, C. R.[Cesar R.], Martin, M. C.[Maria C.], Segovia, J. J.[Jose J.]
Fluid Phase Equilib. 2006, 239, 2, 178-182
ABSTRACT
Isothermal vapour liquid equilibrium data have been measured for the ternary system (di-isopropyl ether + isobutanol + benzene) and two of the binary systems involved (di-isopropyl ether + isobutanol) and (isobutanol + benzene) at 313.15 K. A static technique consisting of an isothermal total pressure cell was used for the measurements. Data reduction by Barker s method provides correlations for GE using the Margules equation for the binary systems and the Wohl expansion for the ternary system. Wilson, NRTL and UNIQUAC models have been applied successfully to both the binary and the ternary systems.
Compounds
# Formula Name
1 C6H14O diisopropyl ether
2 C6H6 benzene
3 C4H10O 2-methyl-1-propanol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:2
  • 3
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:2
  • 3
  • POMD
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:2
  • 4
  • POMD
  • 3
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:2
  • 28
  • POMD
  • 2
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:2
  • 26
  • POMD
  • 2
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CCELL::UFactor:2
  • 2
  • POMD
  • 2
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CCELL::UFactor:2
  • 2
  • POMD
  • 2
  • 3
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • CCELL:UFactor:2
  • 78