Thermodynamics Research Center / ThermoML | International Journal of Thermophysics

Volumetric Properties of 3-Methylbutyl Ethanoate with Ethyl Acrylate, Butyl Acrylate, Methyl Methacrylate, and Styrene at 25 C

Peralta, R. D., Infante, R., Cortez, G., Wisniak, J.
Int. J. Thermophys. 2005, 26, 3, 679-692
ABSTRACT
Densities of the binary systems of 3-methylbutyl ethanoate (isoamyl acetate) with ethyl acrylate, butyl acrylate, methyl methacrylate, and styrene have been measured as a function of composition at 25C and atmospheric pressure using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess volumes were correlated with the Redlich-Kister equation and with a series of Legendre polynomials. The excess volumes are positive for the binary systems of 3-methylbutyl ethanoate with each of the three acrylate monomers and negative for the system with styrene. The 3-methylbutyl ethanoate + butyl acrylate system exhibits near-ideal behavior.
Compounds
# Formula Name
1 C7H14O2 3-methylbutyl ethanoate
2 C5H8O2 ethyl propenoate
3 C7H12O2 butyl 2-propenoate
4 C5H8O2 methyl methacrylate
5 C8H8 styrene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 23
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 23
  • POMD
  • 4
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 23
  • POMD
  • 5
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 23