TDE Experiment Planning: Evaluate Proposed Measurement (Pure Compound)

Overview and Process Steps

  • Step 1: Select Evaluate Proposed Measurement (Pure Compound) from the Experiment Planning Menu: Show
  • Step 2: Complete the Experiment Planning Form: Show
    • Select a compound
    • Specify property, experimental conditions (T and p, as needed), and uncertainty
  • Step 3: Do TDE Analysis and View Results: Show
  • Step 4: Review/Analyze experimental data in TDE (Optional): Go To Property - Show

Analysis is based on:

  • Availability of experimental data
  • Availability of predicted data
  • Inconsistency in experimental data
  • Gaps in experimental temperature-pressure space
  • Possible property derivation from other properties
  • Experimental Uncertainties

Possible findings returned by TDE:

  • No experimental data + no prediction available; new data would be beneficial
  • No experimental data, but prediction available; new data needed for prediction validation
  • No experimental data for property, but can be derived from other properties (e.g. Hvap from vapor pressures)
  • Data are available, but inconsistent; new data might resolve
  • Proposed measurement will fill a gap in the existing data
  • Proposed measurements will decrease the uncertainty of available data
  • Measurement would not provide new information
  • The proposed phase does not exist in the range specified