TDE Experiment Planning: Evaluate Proposed Measurement (Pure Compound)
Overview and Process Steps
- Step 1: Select Evaluate Proposed Measurement (Pure Compound) from the Experiment Planning Menu: Show
- Step 2: Complete the Experiment Planning Form: Show
- Select a compound
- Specify property, experimental conditions (T and p, as needed), and uncertainty
- Step 3: Do TDE Analysis and View Results: Show
- Step 4: Review/Analyze experimental data in TDE (Optional): Go To Property - Show
Analysis is based on:
- Availability of experimental data
- Availability of predicted data
- Inconsistency in experimental data
- Gaps in experimental temperature-pressure space
- Possible property derivation from other properties
- Experimental Uncertainties
Possible findings returned by TDE:
- No experimental data + no prediction available; new data would be beneficial
- No experimental data, but prediction available; new data needed for prediction validation
- No experimental data for property, but can be derived from other properties (e.g. Hvap from vapor pressures)
- Data are available, but inconsistent; new data might resolve
- Proposed measurement will fill a gap in the existing data
- Proposed measurements will decrease the uncertainty of available data
- Measurement would not provide new information
- The proposed phase does not exist in the range specified